How To Make A Queen Size Platform Bed With Storage

How to Build a Queen Size Platform Bed With Storage

Building a queen size platform bed with storage is a great way to add extra storage space to your bedroom while also creating a stylish and modern look. This project is relatively easy to build and can be completed in a weekend with the right tools and materials.

Materials you'll need:

8 - 2x6 boards, 8 feet long
4 - 2x4 boards, 8 feet long
1 sheet of 3/4 inch plywood, 4 feet x 8 feet
1 box of 2 1/2 inch wood screws
1 box of 1 1/4 inch wood screws
Wood glue
Sandpaper
Paint or stain (optional)

Tools you'll need:

Circular saw or miter saw
Drill
Screwdriver
Clamps
Level
Measuring tape
Safety glasses

Instructions:

Step 1: Cut the lumber

Cut the 2x6 boards to the following lengths: 4 – 84 inches, 4 - 54 inches.
Cut the 2x4 boards to the following lengths: 4 – 60 inches.
Cut the plywood to the following dimensions: 60 inches x 84 inches.

Step 2: Assemble the frame

Attach the 2x6 boards to the 2x4 legs using 2 1/2 inch wood screws. The 2x6 boards should be flush with the tops of the legs.
Make sure the frame is square by measuring the diagonals. The diagonals should be equal in length.
Reinforce the corners of the frame by adding corner braces. Cut 2x4 boards to fit diagonally across the corners of the frame and attach them with 2 1/2 inch wood screws.

Step 3: Attach the plywood deck

Center the plywood deck on top of the frame and attach it with 1 1/4 inch wood screws. Make sure the screws are countersunk so that they do not protrude above the surface of the plywood.
Sand the edges of the plywood to smooth them out.

Step 4: Add storage drawers (optional)

If you want to add storage drawers, you can build them using 1x12 boards and 1/2 inch plywood.
Cut the 1x12 boards to the following lengths: 2 – 54 inches, 2 – 18 inches.
Cut the 1/2 inch plywood to the following dimensions: 2 – 54 inches x 18 inches.
Assemble the drawers by attaching the 1x12 boards to the plywood using 1 1/4 inch wood screws.
Attach the drawers to the frame of the bed using drawer slides.

Step 5: Finish the bed