Queen Size Storage Bed Diy

Queen Size Storage Bed DIY

Building a queen size storage bed is a great way to add extra storage space to your bedroom without taking up too much floor space. It's also a relatively easy project that can be completed in a weekend with a few basic tools and materials.

Materials You'll Need:

2x4 lumber (8) - cut to 75 inches
2x4 lumber (2) - cut to 60 inches
2x4 lumber (4) - cut to 29 inches
1x4 lumber (12) - cut to 75 inches
1x4 lumber (4) - cut to 29 inches
Plywood (1 sheet) - cut to 60x75 inches
Wood screws
Nails
Drill
Saw
Hammer
Clamps

Instructions:

1. Assemble the frame of the bed by attaching the 2x4 lumber to the plywood. The 2x4s should be placed around the perimeter of the plywood, with the 75-inch pieces on the sides and the 60-inch pieces on the ends. Use wood screws to secure the 2x4s to the plywood.

2. Attach the legs to the frame of the bed by screwing the 2x4 lumber into the corners of the frame. The legs should be 29 inches tall.

3. Build the drawers by attaching the 1x4 lumber together. The drawers should be 29 inches wide and 18 inches deep. Use wood screws to secure the 1x4s together.

4. Attach the drawer slides to the sides of the frame of the bed and to the drawers. The drawer slides should be positioned so that the drawers slide smoothly in and out of the bed.

5. Install the plywood top onto the frame of the bed. Use nails to secure the plywood to the frame.

6. Finish the bed by painting or staining it. You can also add decorative touches, such as trim or molding.

Tips:

Make sure to measure your mattress before you start building the bed so that you can make sure that the drawers will fit underneath it.
If you want to make the drawers more durable, you can add a piece of plywood to the bottom of each drawer.
You can use any type of wood to build the bed, but pine is a good choice because it is inexpensive and easy to work with.