How To Build A King Size Platform Bed With Drawers

The essential aspects of building a king-size platform bed with drawers involve meticulous planning, precise measurements, and skillful assembly. This article will delve into the critical components of the project, providing a comprehensive guide to assist you in creating a sturdy and functional bed frame. ### Materials * Lumber (Pine, Poplar, or Oak) * Plywood (¾ inch thick) * Drawers (pre-made or build your own) * Screws * Nails * Wood glue * Drawer slides * Handles or knobs (optional) ### Tools * Circular saw or miter saw * Drill * Screwdriver * Measuring tape * Level * Sander or sandpaper ### Step 1: Determine the Bed Frame Dimensions Calculate the dimensions of the bed frame based on the standard king-size mattress you will be using (76 inches wide x 80 inches long). Add 2 inches to the width and length for the frame overhang. For instance, a king-size bed frame would measure 78 inches wide x 82 inches long. ### Step 2: Construct the Side Rails Cut four pieces of lumber to the length of the bed frame (82 inches). These will be the side rails. Join the side rails using plywood by attaching it to the inside of the rails using wood glue and screws. The plywood should be cut to the height you want the bed frame to be (e.g., 18 inches). ### Step 3: Assemble the Headboard and Footboard If desired, construct a headboard and footboard using plywood and lumber. For a simple design, cut two pieces of plywood to the desired height and width of the headboard and footboard. Attach them to two pieces of lumber that will serve as the legs. ### Step 4: Attach the Side Rails to the Headboard and Footboard Join the side rails to the headboard and footboard by attaching plywood to the inside of the frame. Ensure the plywood is flush with the top of the side rails and the bottom of the headboard and footboard. ### Step 5: Install Drawer Slides and Drawers Determine the placement of the drawers and install the drawer slides accordingly. Insert the drawers into the slides and ensure they operate smoothly. ### Step 6: Add Finishing Touches Sand the bed frame to remove any splinters or rough edges. Stain or paint the bed frame to your desired finish. You can also add handles or knobs to the drawers for easier access.