How To Make A Split Corner Bedskirt

How to Make a Split Corner Bedskirt

A split corner bedskirt offers a tailored, polished look to a bed, especially useful for beds with footboards or storage underneath. Creating a custom-made split corner bedskirt allows for a perfect fit and personalized style choices. This guide outlines the steps involved in crafting a split corner bedskirt from measuring to final adjustments.

Materials Needed:

The following materials are necessary for this project:

Measuring tape
Fabric (amount depends on bed size, see calculations below)
Scissors
Sewing machine
Thread (matching fabric)
Pins
Iron and ironing board
Seam ripper (optional)

Measuring the Bed:

Accurate measurements are crucial for a well-fitting bedskirt. Measure the following dimensions:

Length of bed: Measure from the headboard to the footboard.
Width of bed: Measure across the bed from side to side.
Drop length: Measure from the top of the box spring to the floor. This is the desired length of the bedskirt.
Footboard height (if applicable): Measure the height of the footboard from the floor to the top edge.

Calculating Fabric Requirements:

Use the following calculations to determine the amount of fabric needed. These calculations include seam allowances:

Panel 1 (footboard): Width of bed + 2 inches (seam allowance). Length: Drop length – footboard height + 2 inches (seam allowance). If there is no footboard, use the drop length + 2 inches.
Panel 2 (side 1): Length of bed + 2 inches. Length: Drop length + 2 inches.
Panel 3 (side 2): Length of bed + 2 inches. Length: Drop length + 2 inches.
Panel 4 (headboard): Width of bed + 2 inches. Length: Drop length + 2 inches.

Cutting the Fabric:

Cut the fabric according to the calculated dimensions. Ensure the fabric is cut straight and square for accurate assembly.

Hemming the Panels:

Hem all four panels along the bottom edge. Fold the fabric up by ½ inch, press with an iron, then fold up another ½ inch and press again. Stitch the hem in place close to the inner folded edge.

Creating the Split Corners:

This is the key step for creating the split corner effect. For each corner, follow these instructions:

Lay out the two adjoining panels (e.g., side panel and footboard panel) right sides together, matching the corner edges.
Measure from the corner inward along both edges the desired drop length minus one inch. Mark this point on both edges.
Draw a straight line connecting the two marked points.
Pin along the drawn line and stitch.
Trim the excess fabric close to the stitched line, leaving a ¼-inch seam allowance.
Finish the raw seam edges with a serger or zigzag stitch to prevent fraying.
Press the seam open.
Repeat for the remaining three corners.

Attaching the Panels:

With right sides facing, pin the panels together along their lengths. Ensure the split corners are aligned correctly. Stitch the panels together, leaving a ½-inch seam allowance. Finish the raw seam edges and press the seams open.

Finishing Touches:

Once all panels are joined, press the entire bedskirt. Check the fit on the bed and make any necessary adjustments. If adjustments are needed, use a seam ripper to carefully undo the stitching and re-sew.

Attaching the Bedskirt (Optional):

The bedskirt can be simply placed on the box spring or attached for a more secure fit. Methods of attachment include using safety pins, Velcro, or sewing a strip of fabric with ties to the top edge of the bedskirt.

This comprehensive guide outlines the steps involved in crafting a split corner bedskirt. Careful measuring, precise cutting, and accurate sewing will result in a professional-looking and well-fitting bedskirt that enhances the overall aesthetic of the bedroom.

How To Choose The Right Bed Skirt Superior Custom Linens

Buy Split Corner Bed Skirt Queen Aanyalinen

Misr Dust Ruffle Bed Skirt Split Corner Easy Fit All Size And Colors

Split Corner Tie Bed Skirt Full Size 54 X 75 Inch 800 Thread Cotton 100 Egyptian 1 Piece 18 Drop Length Bedskirt Easy Fit Fade Resistant Medium Blue Solid Com

Misr Dust Ruffle Bed Skirt Split Corner Easy Fit All Size And Colors

Ruffled Bed Skirt With Split Corners White Twin Bedskirt Gathered Style Easy Fit Up To 12 Inch Drop Wrap Platform Three Sided Coverage Ruffle Skir

Split Corner Tie Bed Skirt Twin Size 39 X 75 Inch 800 Thread Cotton 100 Egyptian 1 Piece 15 Drop Length Bedskirt Easy Fit Fade Resistant White Solid Com