How To Take Down And Move A Sleep Number Bed

How to Take Down and Move a Sleep Number Bed

Sleep Number beds are popular for their adjustable firmness, but moving them can be a daunting task. Their unique design and the weight of the air chambers make them more challenging to dismantle and transport than traditional mattresses. However, with careful planning and the right tools, you can safely take down and move your Sleep Number bed without damage.

1. Prepare for the Disassembly

Before you begin, gather the necessary tools and ensure you have a clear workspace. You will need the following:

A Phillips head screwdriver
A wrench
A flat-head screwdriver (optional)
A helper (recommended)
Heavy duty moving blankets or padding
A dolly or hand truck (optional)

Clear the area around the bed and remove all bedding, pillows, and accessories. If possible, move furniture and other obstacles away from the bed to provide ample workspace.

2. Disassemble the Sleep Number Bed

The disassembly process varies slightly depending on the specific model of Sleep Number bed. However, the general steps are as follows:

Detach the headboard and footboard: Most Sleep Number beds have removable headboards and footboards. Check for screws or bolts attaching them to the frame and carefully unscrew them with a Phillips head screwdriver. If there are any clips or latches, gently release them.
Remove the side rails: The side rails of the Sleep Number bed are usually connected to the frame with screws or bolts. Unfasten these connections and lift the side rails off the frame. Be cautious as they can be heavy.
Disconnect the air pump: Locate the air pump, often situated near the footboard or under the bed. Unplug the pump and detach any hoses or cables attached to the air chambers. If there are any pressure gauges or control units, disconnect those as well.
Remove the mattress: The mattress, consisting of two air chambers separated by a fabric layer, can be lifted off the frame. Carefully remove the mattress and place it on the floor, ensuring to protect it with moving blankets or padding.
Disassemble the frame: Depending on the model, the frame may be further disassembled into smaller sections for easier transportation. In some cases, the frame might be designed as one unit and require careful maneuvering.

3. Packing and Moving the Sleep Number Bed

Once the bed is disassembled, pack the individual components carefully to prevent damage during transport. Use moving blankets or padding to protect the frame, mattress, headboard, and footboard. Secure the packed components with rope or straps for stability.

If you have a helper, lift the heavy components, such as the frame and mattress, onto a dolly or hand truck. If transporting the bed yourself, carefully maneuver each component to the move destination. Be sure to use a stair-climbing dolly or hand truck if you need to transport the bed up or down stairs.

4. Reassembling the Sleep Number Bed

Upon arrival at the new location, reverse the disassembly process to reassemble the Sleep Number bed. Carefully lift the frame to its desired position and attach the side rails. Secure the headboard and footboard. Once the frame is assembled, place the mattress back onto the frame. Reattach the air pump, connect the hoses and cables, and plug the pump in.

After reassembling the bed, carefully unpack the moving blankets and padding. Ensure that the bed is level and stable before use.

Moving a Sleep Number bed can be a challenging task, but it is achievable with the right preparation and assistance. By following these steps, you can safely take down, transport, and reassemble your Sleep Number bed, enjoying its comfortable features in its new location.