Diy Queen Platform Bed With Drawers

Unlock the Secrets of a DIY Queen Platform Bed with Drawers

Embark on a journey of self-sufficiency and style with a DIY queen platform bed with drawers. This versatile piece of furniture not only elevates your sleep experience but also adds a touch of organization to your bedroom. Embrace the challenge of crafting your own bed and delve into the essential aspects that will guide you to success.

1. Materials and Measurements

Materials:

Solid pine or cedar (for the frame and slats)
Plywood (for the drawers and drawer fronts)
Wood screws (various sizes)
Wood glue
Drawer slides
Handles or knobs (for drawers)

Measurements:

Mattress size: Queen size (60" x 80")
Outer frame dimensions: 62" x 82"
Inner frame dimensions: 60" x 80"
Drawer width: 18" (can be adjusted to fit your needs)
Drawer height: 8"
Drawer depth: 18"

2. Tools and Equipment

Tools:

Circular saw
Miter saw or miter box
Drill
Screwdriver
Clamps
Tape measure
Level

Equipment:

Safety glasses
Hearing protection

3. Bed Frame Construction

Step 1: Cut the Frame Pieces

Use a circular saw to cut the pine or cedar into the following pieces:

2 side rails (76" x 6")
2 end rails (62" x 6")
6 legs (6" x 6" x 12")

Step 2: Assemble the Frame

Assemble the frame by attaching the end rails to the side rails using wood screws. Then, attach the legs to the corners of the frame.

Step 3: Cut and Attach the Slats

Cut the pine or cedar into slats that are approximately 2" wide and 54" long. Space the slats evenly and attach them to the inner frame using wood screws.

4. Drawer Construction

Step 1: Cut the Drawer Pieces

Cut the plywood into the following pieces for each drawer:

1 drawer bottom (18" x 18")
2 drawer sides (8" x 18")
2 drawer ends (8" x 11")
1 drawer front (18" x 11")

Step 2: Assemble the Drawers

Assemble the drawers by attaching the sides and ends to the bottom using wood glue and screws. Then, attach the drawer front to the top of the drawer box.

Step 3: Install Drawer Slides

Attach drawer slides to the inner side rails of the bed frame and to the bottom of each drawer. This will allow the drawers to slide in and out smoothly.

5. Finishing Touches

Step 1: Sand and Stain

Sand the entire bed frame and drawers to remove any rough edges or splinters. Then, apply a stain or paint in the color of your choice.

Step 2: Attach Handles or Knobs

Install handles or knobs to the center of each drawer front.

Step 3: Enjoy Your Creation

Place your mattress on the platform bed and enjoy the fruits of your labor. Relax and drift off to sleep in the comfort and satisfaction of having built your own beautiful and functional queen platform bed with drawers.