How To Build A Wood Queen Size Bed Frame

How to Build a Wood Queen Size Bed Frame

### Materials List: - (8) 2x6 pine boards, 8 feet long - (4) 2x4 pine boards, 8 feet long - (16) 3-inch wood screws - (8) 2-inch wood screws - Wood glue (optional) - Sandpaper or sanding block - Measuring tape - Pencil - Drill - Circular saw or jigsaw - Sander (optional) ### Step-by-Step Instructions:

1. Cut the 2x6 Pine Boards:

- Cut (4) 2x6 boards to 84 inches long for the side rails. - Cut (4) 2x6 boards to 60 inches long for the headboard and footboard.

2. Assemble the Side Rails:

- Align two of the 84-inch side rails parallel to each other, 60 inches apart (the outer edges). - Align the two remaining side rails in the same way, but 30 inches apart. - Drill pilot holes for 3-inch wood screws along the edges of the side rails, about 6 inches apart. - Apply wood glue (optional). - Secure the side rails together using 3-inch wood screws.

3. Attach the Headboard and Footboard:

- Place the headboard on one end of the assembled side rails, aligning it flush with the outer edges. - Drill pilot holes and secure it with 3-inch wood screws. - Repeat the same process for the footboard on the other end.

4. Reinforce the Frame with 2x4s:

- Cut (4) 2x4 boards to 28 inches long. - Place these 2x4s inside the frame, perpendicular to the side rails, 12 inches from each end. - Drill pilot holes and secure them with 2-inch wood screws. - This will provide additional support for the mattress.

5. Sand and Finish:

- Use sandpaper or a sander to smooth any rough edges or splinters. - You can stain, paint, or leave the wood natural.

Tips:

- Use straight boards for the side rails and headboard/footboard to ensure a sturdy and level bed frame. - Drill pilot holes before inserting screws to prevent splitting the wood. - If you don't have a circular saw or jigsaw, you can rent or even hire someone to cut the wood for you. - Consider adding a box spring or foundation under the mattress for extra support and comfort.