How To Diy A Murphy Bed

How to DIY a Murphy Bed: A Beginner's Guide

A Murphy bed is a great way to save space in a small bedroom or apartment. It's a bed that's hidden inside a cabinet, so when it's not in use, it looks like a regular piece of furniture.

Murphy beds are relatively easy to build, and they can be a great way to add extra sleeping space to your home. Here's a step-by-step guide on how to build your own Murphy bed:

Materials You'll Need:

3/4-inch plywood (cut to the following dimensions: 2 pieces 8 feet long by 3 feet wide, 2 pieces 6 feet long by 3 feet wide, 1 piece 8 feet long by 18 inches wide)
1x4 pine boards (cut to the following dimensions: 2 pieces 8 feet long, 2 pieces 6 feet long, 2 pieces 18 inches long)
1x6 pine boards (cut to the following dimensions: 2 pieces 8 feet long, 2 pieces 6 feet long)
1/2-inch plywood (cut to the following dimensions: 1 piece 8 feet long by 3 feet wide)
1/4-inch plywood (cut to the following dimensions: 1 piece 8 feet long by 3 feet wide)
2 hinges (3 inches long)
1 piano hinge (8 feet long)
1 gas spring (150 pounds)
Wood screws
Washers
Lag bolts
Corner braces
Door handle
Paint or stain (optional)

Tools You'll Need:

Circular saw
Drill
Screwdriver
Measuring tape
Level
Clamps

Instructions:

1. Build the cabinet. The first step is to build the cabinet that will house the Murphy bed. The cabinet should be made of 3/4-inch plywood. The dimensions of the cabinet will depend on the size of your bed. 2. Install the hinges. Once the cabinet is built, you need to install the hinges. The hinges will allow the bed to fold up and down. 3. Install the gas spring. The gas spring will help to lift the bed up and down. The gas spring should be mounted to the back of the cabinet and the bed frame. 4. Install the mattress. Once the gas spring is installed, you can install the mattress. The mattress should be placed on the bed frame. 5. Finish the bed. Once the mattress is installed, you can finish the bed. You can paint or stain the bed to match your decor, or you can leave it unfinished.

Tips for Building a Murphy Bed:

Use sturdy materials. Murphy beds are heavy, so it's important to use sturdy materials like plywood and pine.
Measure carefully. It's important to measure carefully when building a Murphy bed. If the measurements are off, the bed may not fit properly or it may not work properly.
Use a level. A level will help you to ensure that the cabinet and bed frame are level. This will help to prevent the bed from tipping over.
Get help from a friend. Murphy beds are heavy, so it's helpful to have someone assist you when building and installing the bed.

Building a DIY Murphy bed is a great way to add extra sleeping space to your home or office. With a little planning and effort, you can build a Murphy bed that is both stylish and functional.